Design and Manufacturing of High Quality Low Cost Product Term Paper

Pages: 3 (761 words)  ·  Bibliography Sources: 8  ·  File: .docx  ·  Level: College Senior  ·  Topic: Engineering

Buy full Download Microsoft Word File paper
for $19.77

Fishing Rod

Design and Manufacture of a High-End Bamboo Fishing Rod

The art of angling has in many ways remained unchanged for a century or more, and though the development of graphite, fiberglass, and composite material rods have changed the industry somewhat the highest-end rods used for fly fishing are still made of bamboo, as the best rods have been made for quite a long time. Material selection and the design and manufacturing process are still complex and detailed undertakings, whoever, and require careful consideration at each stage. In the following pages, a brief description of the design and manufacturing for a bamboo fly-fishing rod will be given, with a focus on certain engineering aspects of the design necessary to maximize quality and usability. Cost and sustainability are also important elements of consideration in the following process overview, and efforts are made to explain each design and manufacturing decision from all angles of the project as fully as is possible in the space given.

Materials Selection and Design

Fly-fishing rods present a unique engineering problem in that they need to possess a great deal of tensile strength while also retaining a high degree of flexibility and elasticity. With greater tensile strength than steel and greater compression resistance than concrete, bamboo has long been recognized as the material of choice for these fly-fishing rods, however not all bamboo is made equal and selecting the right bamboo is cost intensive (Newswee, 2008; Penrose, 2008; Carrasco et al., 2009). A specific type of bamboo rod is typically purchased in six foot lengths with the bamboo nodes already mostly flattened; this rod is then split down its length into six large canes which are made into successively smaller strips through a laborious hand process (Penrose, 2008). This element of the operation could most likely be mechanized but this would cost a great deal and would likely lead to quality control problems; though the skilled labor need for the task is high this expense is still preferable to mechanization (Penrose, 2008). The high-grade Tonkin bamboo most typically utilized in this application would have been pre-selected by the supplier for appropriate qualities, yet the individual strips broken down must themselves be examined for flexibility and strength before selecting those that will become fishing rods (Penrose, 2008;… [END OF PREVIEW]

Two Ordering Options:

?
Which Option Should I Choose?
1.  Buy full paper (3 pages)Download Microsoft Word File

Download the perfectly formatted MS Word file!

- or -

2.  Write a NEW paper for me!✍🏻

We'll follow your exact instructions!
Chat with the writer 24/7.

Quality Without Tears Book Report


New E-Business Venture Term Paper


Best Export Strategy to Expand Highest Quality Table Wines to India Term Paper


Manufacturing Process of a Bicycle Term Paper


Dell Total Quality Management Questions Essay


View 792 other related papers  >>

Cite This Term Paper:

APA Format

Design and Manufacturing of High Quality Low Cost Product.  (2012, December 10).  Retrieved January 18, 2020, from https://www.essaytown.com/subjects/paper/design-manufacturing-high-quality-low/6380744

MLA Format

"Design and Manufacturing of High Quality Low Cost Product."  10 December 2012.  Web.  18 January 2020. <https://www.essaytown.com/subjects/paper/design-manufacturing-high-quality-low/6380744>.

Chicago Format

"Design and Manufacturing of High Quality Low Cost Product."  Essaytown.com.  December 10, 2012.  Accessed January 18, 2020.
https://www.essaytown.com/subjects/paper/design-manufacturing-high-quality-low/6380744.